SeaShield 500™ System
The system is comprised of a custom-made fiberglass jacket that provides a permanent protective form-work which is filled with water-insensitive epoxy grout to protect damaged piles.
The SeaShield 500 Jacket™ is provided with a vertical tongue and groove closure and is supplied to a project specific thickness. Non-corrosive standoffs can be supplied to maintain the correct spacing of the jacket around the pile. This ensures the correct thickness of SeaShield 550 Epoxy Grout™ in the completed system. This grout can displace existing water and can be easily pumped, tremied or poured into the SeaShield 500 jacket even while it is submerged in water. By eliminating the need to dewater the site or build cofferdams, the SeaShield 500 System drastically reduces the overall expense and loss-of-use cost, as the structure can generally remain in service while the repair is executed.
For further information on surface preparation requirements for SeaShield products, please contact us.
Request Safety Data Sheets (SDS)- Economically protect damaged structures in place, system can be applied underwater or to wet surfaces
- High-strength, water-insensitive materials bond well to steel, concrete and timber pilings
- The structure can generally remain in service during installation of the System
- Greatly reduce corrosion, deterioration, and erosion
- Highly resistant to impact and abrasion
- Excellent stability under UV weathering conditions
- Accommodates piles of various shapes and sizes
- Easy to install, no need for heavy-lifting equipment
- Low-maintenance following repair
- Low environmental impact
- Suitable for use over a wide range of ambient temperatures
- Suitable for use in the immersed, tidal and splash zones, in marine, estuarine, lentic and riverine environments
-
WCD SeaShield Systems
literature
