Steelcoat 100/400™ Combination System
The combined Steelcoat 100/400™ System is now widely specified for difficult applications because it brings all of the strengths of both Steelcoat™ systems together so well. The combined system comes in two variations A and B.
Denso Steelcoat 100/400(A) System: For badly pitted and rusted pipework and structural steelwork.
For pipework, Steelcoat 100/400(A) System comprises Denso Hi-Tack™ Primer [Denso Paste™ outside the UK] followed by a double wrap (55% overlap) of Denso Hi-Tack™ Tape [Denso Tape™ or Densyl™ Tape, outside the UK]. The outer Denso™ Ultraseal Tape (or Denso™ Ultraseal RT) is also applied with a 55% overlap before painting.
For steelwork, the Steelcoat 100/400(A) System is applied as above with both tapes featuring a minimum 55% overlap before painting.
Once applied the fabric backed Denso Ultraseal Tape (or Denso Ultraseal RT) is overpainted with two coats of Denso™ Acrylic Topcoat.
Denso Steelcoat 100/400(B) System: For damp/sweating pipework surfaces.
As above ‘For pipework’ with Denso Paste S105™ replacing the Denso Hi-Tack Primer [Denso Paste outside the UK].
- Cold-applied
- Surface tolerant
- Minimum surface preparation needed – hand tool cleaning only
- Highly conformable
- Ideal for badly pitted and rusted steelwork
- Ideal for damp or humid steelwork
- If applied in the recommended way it will have a 30 year expected service life
-
Denso Steelcoat 100 / 400 System IFU (UK)
application instructions -
Denso Steelcoat 100 /400 System IFU (non-UK)
application instructions
-
WCD Steelcoat 100/400 System (UK)
literature -
WCD Steelcoat 100/400 System (non-UK)
literature -
WCD Steelcoat Pipebridge Protection (UK)
literature -
WCD Steelcoat Pipebridge Protection (non-UK)
literature -
WCD Steelcoat Systems
literature
