-
Viscotaq™ Casing End Seal System
A visco-elastic system to prevent water infiltration and corrosion where the carrier pipe enters the casing pipe.
Learn more
-
Viscotaq™ Transition Coating System (Soil/Air)
A visco-elastic system for the protection of soil-to-air pipeline transitions.
Learn more
-
Viscotaq™ Tank Chime Sealing System
A visco-elastic system for protecting the base area of aboveground steel storage tanks from corrosion.
Learn more
-
ViscoWrap™ Series
Amorphous, apolar, semi-solid, polyolefin coating.
Learn more
-
Viscotaq™ EZ Wrap Series
Visco-elastic coating with paintable backing.
Learn more
-
ViscoSealant™
Amorphous, apolar, visco-elastic, semi-solid, polyolefin sealant.
Learn more
-
ViscoMastic™ Series
Amorphus, apolar, visco-elastic, semi-solid, polyolefin mastic.
Learn more
-
Viscotaq™ PE Outerwrap
All-purpose polyethylene protective tape.
Learn more
-
Viscotaq™ PVC Outerwrap
All-purpose protective tape.
Learn more
-
Viscotaq™ Coating Patch
Visco-elastic repair patch.
Learn more
-
Denso Tape™ – Anti-Corrosion Petrolatum Tape
Denso Tape™; the renowned multi-purpose, surface tolerant anti-corrosion petrolatum tape for steel pipes, fittings and structural steel.
Learn more
-
Densyl™ Tape
A multi-purpose, surface tolerant petrolatum tape for corrosion prevention of steel pipes and fittings in tropical climates.
Learn more
-
Denso LT™ Tape
A multi-purpose, surface tolerant petrolatum tape for corrosion prevention of steel pipes and fittings in low temperature environments.
Learn more
-
Denso™ Hi-Tack Tape
A surface tolerant, high-tack petrolatum tape for the protection of above ground steelwork.
Learn more
-
Denso™ Marine Piling Tape
A surface tolerant, water displacing petrolatum tape for the protection of wet or submerged jetty piles and pipework.
Learn more
-
Densopol™ Tapes
High performance, reinforced rubber bitumen tapes for below ground pipeline corrosion prevention.
Learn more
-
Premier Shrink Sleeves™
A comprehensive range of heat shrinkable sleeves for the protection of welded pipe joints and the repair of damaged factory coatings in pipeline construction.
Learn more
-
Steelcoat™ Wind Turbine Base Protection System
Effective corrosion management for wind turbine bases.
Learn more
-
Steelcoat™ Soil Air Interface System
A combined tape and liquid coating system for protecting the vulnerable area where pipes emerge above ground from running underground in elevated temperatures.
Learn more
-
Steelcoat 100™ System
A petrolatum tape system for the protection of above ground pipe and steelwork.
Learn more
-
Steelcoat 100/400™ Combination System
A combination of two Denso Steelcoat™ systems to give extra protection in difficult areas such as badly pitted and rusted pipe/steelwork and damp sweating pipe/steelwork.
Learn more
-
Steelcoat 200™ System
A petrolatum tape system for the protection of above ground pipelines operating at elevated service temperatures.
Learn more
-
Steelcoat 400™ System
A reinforced tape system for the protection of above ground pipe and steelwork.
Learn more
-
Steelcoat 1000™ System
A two component polyester resin coating reinforced with glass flake for protecting structural steel in aggressive environments such as bridges, lock gates or marine applications.
Learn more
-
SeaShield 2000FD™ System
A heavy-duty system for the protection of steel piles, that are round, square, hexagonal, octagonal or H-section in shape.
Learn more
-
SeaShield 100™ System
A medium-duty system for the protection of steel piles, that are round or H-section in shape.
Learn more
-
SeaShield 80™ System
A light-duty system for the protection of cylindrical steel, concrete or timber piles. The system is frequently used in conjunction with other systems.
Learn more
-
SeaShield 70™ System
A system for standard to heavy duty applications to protect steel and timber piles. For piles that are round, square, hexagonal, octagonal or variable in shape.
Learn more
-
SeaShield 70/80™ System
A combination of two SeaShield™ systems offering multiple levels of protection for submerged pipelines, shoreline pipelines and complex marine structures.
Learn more
-
SeaShield 500™ System
A very heavy duty system for the protection of concrete and timber piles of variable shapes. The SeaShield 500™ System is typically used to protect piles with damage and less than 25% section loss.
Learn more
-
SeaShield FX-70™ System
A very heavy duty system for the protection of concrete and timber piles of variable shapes. The SeaShield FX-70™ System is typically used to protect piles with damage and more than 25% section loss.
Learn more
-
SeaShield Inspection Port™
An optional addition to the SeaShield 2000FD™ System, the patented Inspection Port allows for rapid inspection of the substrate without requiring removal of the entire system.
Learn more
-
SeaShield Fibre-Form™ System
A custom-made fiberglass jacket that provides a permanent protective form-work. Typically fabricated to round or square sections, other shape sections are available on request.
Learn more
-
Protal 600 CTE™
A two-part high build coal tar epoxy that can be applied as a single or two-coat system to protect steel or concrete substrates
Learn more
-
Protal 600 CTE LOW VOC™
A two-part high build coal tar epoxy that has low VOC and can be applied as a single or two-coat system to protect steel or concrete substrates.
Learn more
-
Protal 650 CTR™
A two-part coating based on polyamide chemistry to replace coal tar epoxy for the protection of steel or concrete substrates.
Learn more
-
Denso Bore-Wrap™
A heavy-duty, sacrificial Abrasion Resistant Outerwrap (ARO) for trenchless pipeline installations, severe handling or installations in difficult terrain.
Learn more
-
Denso™ PVC Self-Adhesive Tape
A PVC tape for overwrapping Denso™ petrolatum tape coatings to give extra mechanical protection.
Learn more
-
Denso™ Glass Outerwrap
A protective coating with exceptional mechanical and impact strength for underwater, underground, and above ground pipe and piles.
Learn more
-
Denso™ Glass Outerwrap UV
A UV protective coating with exceptional mechanical and impact strength for underwater, underground, and above-ground pipes and piles.
Learn more
-
HoldTight™ 102 Flash Rust Inhibitor
A flash rust inhibitor & salt remover for freshly cleaned steel surfaces prior to protective coating.
Learn more
-
Archco 400 Series™
A range of medium-duty reinforced glass flake linings for the effective protection of steel pipes and tanks.
Learn more
-
Archco 436™ Epoxy – Pipe Lining
A hard-wearing epoxy lining for the effective protection of pipe internals.
Learn more
-
Archco 453™ Epoxy Pipe Lining
An extremely durable epoxy lining for the effective protection of industrial tank and pipe internals. Excellent temperature resistance up to 200°C.
Learn more
-
Archco 466™ Epoxy – Pipe Lining
A glass flake epoxy lining designed for use in chemically aggressive environments.
Learn more
-
Archco 500 Series™
A range of heavy-duty reinforced glass flake linings for the effective protection of steel pipes and tanks.
Learn more
-
Denso™ Profiling Mastic
A self-supporting, low-density petrolatum mastic for moulding and filling irregular profiles.
Learn more
-
Densyl™ Mastic
A self-supporting petrolatum mastic for moulding and filling irregular profiles – available in strips, blocks or as a blanket.
Learn more
-
Denso Paste™ Petrolatum Primer
A soft paste for the preparation of metal surfaces prior to the application of Denso™ petrolatum tapes.
Learn more
-
Denso™ Hi-Tack Primer
A tacky, adhesive primer for use with Denso Hi-Tack™ Tape and Steelcoat™ Systems.
Learn more
-
Denso Paste S105™
A soft brown paste primer for use underwater prior to applying Denso™ petrolatum tapes
Learn more
-
Denso Primer D™ Bitumen Based Primer
A bitumen based primer for use with Denso™ Bitumen Tapes.
Learn more
